Movement Principle of 3 Plate Mold

With the development of intelligence and miniaturization of electronic products, the precision of products is getting higher and higher, and the application of 3 plate mold I / M process is becoming more and more common. Traditional manual or robot assisted implantation is not efficient, so the pull type I / M process is becoming more and more popular.

There are three types of commonly used 3 plate mold: the first one is between the stripping plate and the female template; the second one is between the stripping plate and the upper fixed plate; and the third one is between the female template and the male template.

When the male mold side is initially pulled by the injection mold maker, there is no connection and obstruction between the stripping plate and the female template due to the installation of the shutter between the male and female templates, and there is no connection and obstruction between the stripper plate and the female template (in most cases, the small pull rod is also equipped with a spring). At this time, the stripper plate and the female template are first separated under the pull, and the female template moves backward with the male template, moving to the set distance (greater than the length of the head), which is blocked by the small pull rod limit block. As the female template continues to move backward along the side of the injection molding machine, the small pull rod is also driven. It drives the stripper plate to move for a set distance (usually 5mm), so as to lower the material head. After the set distance is moved, the small pull rod and the female template stop moving.
The side of the injection moulder continues to move backward from the moving side, and the tensile force increases continuously, which exceeds the locking force of the shutter. The female formwork and the male formwork are separated, and stop when they are separated to the set distance.
Under the push of the ejector, the ejector plate drives the ejector mechanism (ejector pin, slant bit, etc.) to start the ejection action, and ejects the finished products (automatically falling or taken away by the manipulator).

The Latest Plastic Injection Molding Articles

Incomplete Plastic Molding of Products Made with Injection Moulding
April 20, 2023This is a frequently encountered problem, but it is also relatively easy to solve. When the problem cannot be solved by technological means, it can be considered to be improved from the design and man...view
How to Choose the Correct Care for Plastic Injection Tooling Products
March 17, 20211: After long-term use of plastic injection tooling products, the cutting edge must be sharpened. After grinding, the cutting-edge surface must be demagnetized and must not be magnetized, otherwise it...view
Draft Angle in Plastic Injection Molded Parts
January 21, 2024If you've ever wondered why draft angles are a crucial element in the injection molding process, this article is for you. So, let's unravel the mysteries behind draft and discover its significance in achieving optimal functionality and cost efficiency in your plastic injection molded parts.view
Top Plastic Mould Manufacturers in China
March 17, 2023Plastic mould is a tool for producing plastic products. With the rapid development of plastic industry and the continuous improvement of engineering plastics in strength, many products originally made...view
Why Choose HanKing Mould?
July 30, 20191. Build the moulds in-house and provide them directly to customersIn order to save cost, we set this factory only make precision mould individual from head quarter, because we are not large mould mak...view
Global Precision Mould Material Conference
October 28, 2019At present, China has become the world's largest mold manufacturing country. According to customs statistics, the total import and export volume of China's molds in 2017 was 7541.8243 million ...view